​​FALL CREEK MOTORS

Engine Cat C2.4 4-cylinder diesel
Net Horsepower 44.1 hp (32.9 kW)
Gross Horsepower 47.6 hp (35.5 kW)
Operating Weight 11,958 lb (5,423 kg)
Fuel Tank Capacity 17.2 gal (65 L)
Hydraulic Pump Flow 39.6 GPM (150 L/min)
Auxiliary Hydraulic Flow 21.1 GPM (Primary)
Travel Speed 1.7–2.8 mph
Maximum Digging Depth 12 ft 4 in (3.76 m)
Maximum Reach at Ground Level 19 ft 10 in (6.04 m)
Maximum Dump Height 13 ft 2 in (4.01 m)
Maximum Cutting Height 17 ft 11 in (5.47 m)
Bucket Digging Force 10,116 lbf (45 kN)
Stick Digging Force 6,500 lbf (28.9 kN)
Swing Speed 10 rpm
Track Width 15.7 in (400 mm)

Standard Features
Enclosed ROPS/FOPS cab with heat and air conditioning (cab models)
Compact Radius (CR) tail swing for working in tight areas
Pilot-operated joystick controls
Hydraulic quick coupler ready
Two-speed travel
Auxiliary hydraulic lines
Dozer blade
Rubber tracks (steel tracks optional)
Automatic swing brake
Load-sensing hydraulic system for smooth operation

Typical Attachments
General purpose buckets
Hydraulic thumb
Trenching bucket
Hydraulic breaker (hammer)
Auger drive
Grapple
Compactor plate

Performance Highlights
Excellent stability for its size.
Compact rear swing minimizes overhang when working near buildings or traffic.
Strong hydraulic performance makes it suitable for grading, trenching, and utility installation.
Easy access to service points for routine maintenance.

Caterpillar repo! 45 horsepower. 12000 lbs. 3600 hours. Angle blade. Hydraulic thumb. 2 speed. Cold air! Runs and operates just like it should! Fresh paint too.     

 $38,500